Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Основные нормы взаимозаменяемости. Общие допуски. Предельные отклонения линейных и угловых размеров с неуказанными допусками
Status:Valid - Supersedes
The standard applies to metal parts made by cutting, or parts made by shaping from sheet metal, and establishes general tolerances for linear and angular dimensions, if these tolerances are not indicated directly at the nominal dimensions. General tolerances on the standard can also be applied to non-metallic parts and parts processed by methods other than cutting or forming from sheet material, if they are not provided by other standards and are suitable for the specified parts.
Стандарт распространяется на металлические детали, изготовленные резанием, или детали, изготовленные формообразованием из листового металла, и устанавливает общие допуски для линейных и угловых размеров, если эти допуски не указаны непосредственно у номинальных размеров. Общие допуски по стандарту могут применяться также для неметаллических деталей и деталей, обрабатываемых способами, не относящимися к обработке резанием или формообразованию из листового материала, если они не предусмотрены другими стандартами и пригодны для указанных деталей.
Choose Language:
Format:Electronic (pdf/doc)
Approved:State Committee of the Russian Federation for Standardization and Metrology, 6/23/2003
SKU:RUSS20833
Price: $94.00
English keywords:angular dimensions; basic norms; general tolerances; interchangeability; limit deviations; linear dimensions; tolerances of angular dimensions; tolerances of linear dimensions;
National keywords:взаимозаменяемость; допуски линейных размеров; допуски угловых размеров; линейные размеры; общие допуски; основные нормы; предельные отклонения; угловые размеры;
E-mail this product to a friendReport Error
|
|
The Product is Contained in the Following Classifiers:
Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »
Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) » 8.1.2 Interchangeability and other design requirements »
ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.10 Tolerances and landings »
National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.10 Tolerances and landings »
National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G12 Tolerances and fits »
National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Tolerances and landings. Surface cleanliness »
As a Replacement Of:
GOST 25670-83: Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication
The Document References:
GOST 2.307-68: Unified system for design documentation. Drawing of dimensions and limit deviations
GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations
GOST 25348-82: Basic norms of interchangeability. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm
GOST 25670-83: Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication
GOST 30893.2-2002: Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications
The Document is Referenced By:
GOST 10580-2006: Technological foundry equipment. General specifications
GOST 11018-2000: Traction railway stock for 1520 mm gauge railways. Wheel sets. General specifications
GOST 11823-91: Check valves for stipulated pressure of pn < 25 MPa (250 kgf/sm2)
GOST 12.4.267-2014: Occupational safety standards system. Special clothing for protection from toxic chemicals. Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 13252-91: Swing check valves for Pnom £25 MPa (250 kgf/cm2). General specifications
GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications
GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)
GOST 14019-2003: Metallic materials. Bend test method
GOST 14901-93: Moulds for the manufacture of industrial rubber articles
GOST 17314-81: Devices for fastening thermal insulation of steel vessels and equipment. Design and dimensions. Technical requirements
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 18176-79: Furniture of packing cases. Specifications
GOST 2.307-2011: Unified system for design documentation. Drawing of dimensions and limit deviations
GOST 2.307-68: Unified system for design documentation. Drawing of dimensions and limit deviations
GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds
GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
GOST 21345-78: Conical, ball and cylindrical cocks set at рnom of up to approx. 16 MPa ( 160 kgf/cm2)
GOST 24258-88: Different types of scaffolding. General specifications
GOST 25827-2014: The tool shanks tapered at 7:24 for the manual and automatic tool changers. Types A, AD, AF, U, UD, UF, J, JD and JF. Dimensions and notation
GOST 27358-87: Press moulds for manufacturing of plastic items
GOST 28295-89: Collectors of electrical rotating machines
GOST 28320-2017: Spiral step drills for holes for metric threads. Dimensions
GOST 29201-91: Plain bearings. Copper alloy bushes
GOST 30340-2012: Corrugated chrysotile cement sheets. Specifications
GOST 30647-99: Casting equipment. Casting machines under low pressure. General specifications.
GOST 30872-2002: Air cooling machines. General specifications
GOST 30893.2-2002: Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 32548-2013: Ventilation for buildings. Air terminal devices. General specifications
GOST 32565-2013: Safety glass for ground vehicles. General specifications
GOST 32832.1-2014: Mandrels with a longitudinal key and guided cut for Shaft cutters. Part 1. The main dimensions
GOST 32832.2-2014: Mandrels with HSK hollow taper shank for milling Shaft cutters. Part 2. Dimensions and notation
GOST 32832.3-2014: Mandrels with taper 7:24 for Shaft cutters for automatic tool changing. Part 3. Dimensions and notation
GOST 32832.4-2014: Mandrels with taper 7:24 for Shaft cutters for manual tool changing. Part 4. Dimensions and notation
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 33531-2015: Tool receiver for type F hollow taper shanks (HSK). Connecting dimensions
GOST 33533-2015: Hollow taper shank of tools (HSK). Type F. Basic dimensions
GOST 33535-2015: Connections and crossings of railway tracks. Specifications
GOST 34598-2019: Agricultural and forestry machines trailed, semi-trailed and semi-mounted, tractor trailers and semi-trailers. Trailer devices. General technical requirements
GOST 34610-2019: Pipe fittings. Electric drives. General specifications
GOST 34657-2020: Cast and rolled wheel centers for railway rolling stock. Non-destructive testing methods
GOST 34825-2022: Glass packaging. Vacuum capper necks. Type 110, standard
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 5761-74: Valves for nominal pressure
GOST 9064-75: Nuts for flanged connections with medium temperature 0 to 650 °C. Types and main dimensions
GOST 9305-2014: Profile convex, concave milling and corner rounding cutters. Specifications
GOST 9324-2015: Worm-type complete fine milling cutters for cylindrical gears with involute profile. Specification
GOST 9570-2016: Box and pestpallets. General specifications
GOST EN 50085-1-2008: Electrical ductwork systems for electrical installations Part 1. General requirements
GOST IEC 60061-4-2014: Lamp caps and cartridges for light sources with gauges for the control of interchangeability and safety. Part 4. Guidelines and general information
GOST IEC 62841-1-2014: Hand-held motor-operated, transportable and horticultural electric tools. Safety and test methods. Part 1. General requirements
GOST ISO 13706-2011: Air-cooled apparatus. General technical requirements
GOST ISO 5415-2014: Transitional sleeves with external taper 7:24 and Morse internal taper with a built-in screw. Dimensions
GOST ISO 5609-2015: Cutters boring with mechanical fastening of replaceable polyhedral plates. Symbols
GOST ISO 7388-3-2014: Threaded inserts for mounting the tool shank tapered 7:24 types AC, AD, AF, UC, UD, UF, JD and JF. Dimensions
GOST MEK 60335-1-2008: Household and similar electrical appliances. Safety. Part 1. General requirements
GOST R 12.4.261-2011: Occupational safety standards system. Special clothing for protection from toxic chemicals. Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions
GOST R 41.43-2005: Uniform provisions concerning the safety glazing materials and their installation on vehicles
GOST R 50895-96: Toothed clutches. Specifications
GOST R 52161.1-2004: Safety of household and similar electrical appliances. Part 1. General requirements
GOST R 52762-2007: Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for bumps to enclosure of products
GOST R 53374-2009: Liquid - propellant rocket engines. General technical requirements for production and quality inspection during supply for use
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
GOST R 55078-2012: Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications
GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications
GOST R 55852-2013: Draft machine. General operating specification
GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications
GOST R 56177-2014: Controlled door closing devices (door closers). Specifications
GOST R 56463-2015: Liquid-propellant rocket engines of small thrust. Production, tests and quality assurance general requirements under in-service delivery
GOST R 57471-2017: Explosion-proof metal works. General technical requirements and test methods
GOST R 57539-2017: Gymnastic equipment. Gymnastic ropes. Dimensions, safety requirements and test methods
GOST R 57542-2017: Gymnastics benches. Dimensions, requirements, test methods
GOST R 57663-2017: Equipment for sports games. Gates for playing ice hockey. Requirements and test methods with regards to safety
GOST R 58310-2018: Stationary simulators. Simulators simulating cross-country skiing. Safety Requirements and Test Methods
GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications
GOST R 58641-2019: General-purpose radial fans. General specifications
GOST R 58684-2019: Fireproof ship doors. General specifications
GOST R 58753-2019: Cargo rope slings for construction. Technical specifications
GOST R 58873-2020: Marine instrument glands for single electric cables input. Specifications
GOST R 60.6.3.23-2022: IEC 62849:2016 Robots and robotic devices. Service mobile robots for domestic work. Methods of performance evaluation
GOST R 70595-2022: Shipboard fittings. General specifications
GOST R 70616-2022: Strips for inscriptions and marking of shipboard electrical switchgear. Types, main dimensions and technical requirements
GOST R 70617-2022: Details of the grounding of marine electrical equipment and cables. Specifications
GOST R IEC 61084-1-2022: Cable and special cable duct systems for electrical installations. Part 1. General requirements
GOST R ISO 12164-1-2013: Hollow taper shank of tools (HSK). Types A and C. Basic dimensions
GOST R ISO 12164-2-2013: Tool receiver for type A and C hollow taper shanks. Connecting dimensions
GOST R ISO 12164-3-2011: Hollow taper shank of tools (HSK). Types T. Basic dimensions
GOST R ISO 12164-4-2011: Tool receiver for type T hollow taper shanks (HSK). Connecting dimensions
GOST R ISO 13706-2006: Air cooled apparatus. General technical requirements
GOST R ISO 13985-2013: Liquid hydrogen. Land vehicle fuel tanks
GOST R ISO 2780-2013: Milling cutters with tenon drive. Interchangeability dimensions for cutter arbours
GOST R ISO 8362-6-2022: Primary packaging and closures for injectable dosage forms. Part 6. Caps combining aluminium and plastic for vials for injectable dosage forms
GOST R ISO 8536-3-2019: Medical infusion devices. Part 3. Aluminum caps for infusion bottles. General technical requirements
OST 34-10-425-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges. Construction and dimensions.
OST 34-10-428-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flanged plugs with a joggle. Construction and dimensions.
PNST 231-2017: Aviation equipment. Hydraulic systems. Pass-through and transitional connectors, under axial pressure fitting for pressure 35 MPa. Angle connector, coupling-nipple with nut
PNST 232-2017: Aviation equipment. Hydraulic systems. Pass-through and transitional connectors, under axial press-fit for pressure 35 MPa. Cross connector, coupling-coupling
PNST 236-2017: Aviation equipment. Hydraulic systems. Connectors pass-through and transitional, under axial pressure fitting for pressure 35 MPa. Angle connector, coupling-nipple
PNST 240-2017: Aviation equipment. Hydraulic system. Pass-through and transitional connectors, under axial pressure fitting for pressure 35 MPa. Connector straight, coupling-nipple with inner cone
PNST 241-2017: Aviation equipment. Hydraulic systems. Pass-through and transitional connectors, under axial pressing on pressure 35 MPa. Connector straight, coupling-nipple with nut
PNST 353-2019: General automobile roads. Expansion joints with rubber compensator spans for road bridges. General specifications
RD 36-62-00: Hoisting equipment. General technical requirements.
ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions
ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions
ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
STB EN 1501-1-2007: Garbage trucks. General specifications and safety requirements. Part 1. Garbage trucks with back loading
STB IEC 60335-1-2008: Household and similar electrical appliances. Security. Part 1. General requirements
STB IEC 60335-1-2013: Household and similar electrical devices. Safety. Part 1. General requirements
TU 3742-011-34390194-2003: Check valves DN 100-1400 PN 8, 0 MPa; PN 12, 5 MPa; PN 16, 0 MPa. Technical conditions
TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided
Customers Who Viewed This Item Also Viewed:
SNiP 41-01-2003 Heating, Ventilation and Air Conditioning (HVAC) Language:English Price: $430.00 | PUE 7th Edition, all sections and exhibits Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits Language:English Price: $478.76 | GOST 17746-96 Sponge titanium. Specifications Language:English Price: $79.00 | GOST 32259-2013 Goat whole drinking milk. Specifications Language:English Price: $168.00 | KMK 2.01.07-96 Loads and impacts Language:English Price: $306.00 | GOST 34233.1-2017 Vessels and apparatus. Norms and methods of strength calculation. General requirements Language:English Price: $178.00 | GOST 33446-2015 Packaging. Determination of formaldehyde concentration in water and model environments Language:English Price: $217.00 |
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.